Co2 diffusors and reactors

Co2 diffussors and reactors are used to get CO 2 dissolved in the water of your aquarium. There are many
diffrent types commercially available as well as DIY types or co2 reactors. The general principal is to get the CO2 to have as long a contact as possible with the water to give it time to dissolve. It is done in a few ways some of them quite complex others as simple as an upside down collection bowl or dome under the water that the gas will stay in till dissolved. Others use air type stones or power heads that that the gas is bubbled through to try and get a high contact with the aquarium water. We offer the more co2 devices for the planted tank than any other aquarium supplier. Co2 keeps algae in check and encourages accelerated growth in freshwater planted aquariums.  Be sure to check out our other Co2 Equipment - co2 diffusors, reactors and regulators.THESE ITEMS HAVE MOVED For all of these great co2 items go to

www.Co2-Canisters.com or

JBJ Nano Cube

 

!

Aqua Medic Membrane Diffuser

co-AM73003
!
Larger picture 
  • Aqua Medic Membrane Diffuser
  • 'Double' passive reactor w/ 2 membrane tubes for up to 50g.
  • Direct 100% CO2 diffusion between membrane & water in opposing to conventional dispensing method. So, you see no ascending bubbles!
  • Membrane allows only CO2 to pass through but not water, so it acts as a check valve too.
  • It can take up to 40 bubbles / min. in high current area or 20 bubbles / min. in low current area.
  • 4 vertical dispensing columns for food or medicinal tablets, etc.
  • Imported from Germany.
  • Aqua Medic Membrane Reactor (single). The Aqua Medic CO2 reactor does not dispense CO2 as a gas bubble into the water. It is rather diffused through the membrane tube directly into the water. The membrane tube consists of a special material which lets gas but no water through. This acts simultaneously as a check valve. The CO2 gas gets through the tube and dissolves on its surface directly in the water. Single reactor good for aquariums up to 50 gallons and may be used inside the aquarium or used externally.
  • Aqualine Buschke membrane reactor double, CO2 4 chamber

    co-AB73004
    !
    Larger picture 
    Aqualine Buschke membrane reactor double, CO2. The Aqualine Buschke CO2 reactor does not dispense CO2 as a gas bubble into the water. It is rather diffused through the membrane tube directly into the water. The membrane tube consists of a special material which lets gas but no water through. This acts simultaneously as a check valve. The CO2 gas gets through the tube and dissolves on its surface directly in the water. Double reactor good for aquariums up to 100 gallons.

    Aqua Medic Circular CO2 Reactor

    co-AM73008
    !
    Larger picture 
    Aqua Medic CO2 Reactor. The reactor introduces CO2 into the aquarium water. It is mounted on the inside of the tank. The special construction produces a very high CO2 diffusion rate, and automatically removes any unwanted gasses. The reactor is sufficient for an aquarium up to 125 gallons.

    Boyu co2 diffusor

    !
    Sale
    This is a all glass and ceramic disc with an internal spiral as well.  Currently we only have the shorter version in stock of this diffusor

    Bubble Counter Liquid 60 ml

    Bubble Counter Liquid MM
    !

    Bubble Counter Liquid

    Special high viscosity liquid to prevent evaporation and spillage in Bubble Counter. It is also fun to see your bubbles ascend in slow motion. To be used externally only and comes in 60 mL bottle

    Co2 Bubble counter Screw inwith check valve

    co2 Bubble counter Screw in
    !
    Bubble counter with check valve 
    This quality co2 bubble counter can be used with jbj co2 regulatores or any regulator or manifold with a screw in type thread. These units come with their own check valve.

    Co2 Manifold System (2 way: splitter with bubble counters)

    Co2 Manifold System (2 way: splitter with bubble counters)
    !
    This co2 splitter can attach  to a jbj or milwaukee unit and includes 2 Bubble counters. Also comes with individual needle valves for precision tuning.

    Co2 Manifold System (3 way: splitter with bubble counters)

    Co2 Manifold System (3 way: splitter with bubble counters)
    !

    This co2 splitter can attach  to a jbj or milwaukee unit and includes 3 Bubble counters. Also comes with individual needle valves for precision tuning.

    Co2 Manifold System (6 way: splitter with bubble counters)

    Co2 Manifold System (6 way: splitter with bubble counters)
    !
    co2_6 WAY_MANIFOLD_WITH_BUBBLE_COUNTER0002
    This co2 splitter can attach  to a jbj or milwaukee unit and includes 6 Bubble counters. Also comes with individual needle valves for precision tuning.

    CO2 Reactor - Diffuser

    co2 reactor - diffuser
    !
    Larger picture 
    • Used to break up the co2 into small particles ensuring proper diffusion in the water.   A powerhead (pump) is used to take the co2 bubble in and push it against the biaballs.  This effectively creates increased contact time of the co2 with your plants.